Mono- and Bis- Maleimide Resins in Preimpregnated Fibres

Authors

  • Heinrich Horacek A-4048 Puchenau, Am Wiesenrain 1, Austria

DOI:

https://doi.org/10.6000/1929-5995.2020.09.01

Keywords:

Thermodynamic, heat resistant, burning behaviour, brittleness, toxicity.

Abstract

Fibres are preimpregnated by solutions of mono- and bis-maleimides with comonomers. Imides alone polymerize to resins with too low energies of fracture. In the presence of Methylene dianiline or Aniline Diphenylmethylenebismaleimide reacts via Michael addition to equimolar addition products. When fibres are preimpregnated with these addition compounds alone or in combination with flame retardants, B-prepregs are obtained, which after curing show high glass temperatures and sufficient energies of fracture. 2.5 moles of Diphenylmethylene bismaleimide and 1mol Methylene dianiline or 1mole Aniline react to resins with glass temperatures of 350 and 380°C and energies of fracture of 75 and 100J/m2. The resins contain no carcinogen or blood harming free amines. A one pot reaction starting from Methylene dianiline and Maleic anhydride is possible and more economic. As polymerized bismaleimides possess their imide bonds in the side chain, they are strictly spoken no polyimides with imide bonds in the main chain. Diphenylmethylenebismaleimide and styrene as copolymer react to an insoluble crosslinked polymer. Fibres are preimpregnated with equimolar mixtures of 2- Bromophenylmaleimide and styrene. After curing laminates with 285°C glass temperature and sufficient energies of fracture are obtained. The heat resistant resins are charring polymers and display higher Limiting Oxygen Indices, when the heats of combustion are increased. Differential Scanning Calorimetry determines the temperatures and the heats of glass transition, which indicate that the glass temperature is raised, when the enthalpy is increased and the entropy reduced, which is achievable by Diphenylbismaleimide and 2-Bromophenylmaleimide with their large side groups appropriate for intermolecular forces and steric hindrance.

References

Othmer K. Polyimides. Encyclopedia of Chemical Technology 3rd ed. John Wiley and Sons/ New York 1982; Vol.18: pp. 704-719.

Othmer K. Polyimides. Encyclopedia of Chemical Technology 4th ed. A. Wiley International Publ. New York 1996; Vol. 19: pp. 829- 834

Othmer K. Composite Materials. Encyclopedia of Chemical Technology 4th ed. A. Wiley Interscience. New York 1993; Vol. 7: 40-60.

Othmer K. Phosphorus-containing Polymers. Encyclopedia of Chemical Technology 3rd ed. John Wiley and Sons/New York 1987; Vol. 11: 101-102.

Polyimides. Ullmann‘s Encyclopedia of Industrial Chemistry. VCH Publishing Inc. 1992; Vol. A21: 253-268.

Mark, Bikales, Overberg, Menges. Encyclopedia of Polymer Science and Engineering 2nd ed. John Wiley and Sons, New York 1988; p. 364

The Encyclopedia of Advanced Materials, Bloor D, Brook RJ, Flemings MC, Mahajan S, ed. Performance Polymers. Pergamon Press Monomers for High 1993; pp. 1692-1700.

Mittal KL. Polyimide and Other High Temperature Polymers, Synthesis, Characterization and Application. Kindle Edition 2009; Vol. 5. https://doi.org/10.1163/ej.9789004170803.i-424 DOI: https://doi.org/10.1163/ej.9789004170803.i-424

Stenzenberger H. Constituent Materials. Bisimide Resins 2001; pp. 97-104. https://doi.org/10.31399/asm.hb.v21.a0003364

Der-Jang L, Kung-Li W, Ying-Chi H, Kueir-Ram L, Juin-Yih L, Chang-Sik H. Advanced polyimide materials: Synthesis, physical properties and applications. Progress in Polymer Science 2012; 37(7): 907- 974. https://doi.org/10.1016/j.progpolymsci.2012.02.005 DOI: https://doi.org/10.1016/j.progpolymsci.2012.02.005

Wilson D, Stenzenberger HD. Polyimide. Taschenbuch Prime 2013.

Behr E. Hochtemperaturbeständige Kunststoffe. Carl Hanser Verlag Munich 1969.

Conley RT. ed. Thermal Stability of Polymers. M. Dekker, New York 1970.

Madorsky SL, Straus S. High Temperature Resistance and Thermal Degradation of Polymers S.C.I Monograph 1961; 13: 60-7414.

Huang F, Huang F, Zhou Y, Du L. Preparation and properties of bismaleimide resins modified with hydrogen silsesquioxane and dipropargylether and their composites. Polymer Journal 2010; 42: 261-267. https://doi.org/10.1038/pj.2009.335 DOI: https://doi.org/10.1038/pj.2009.335

Rattam V. Polyimides Chemistry & Structure. Property relationship. Literature review Modern Plastics mid. Oct. Encyclopedia Issue Polyimide. Thermoset 1999; 146.

Daman, Global Bismaleimide Market by manufacturers, Regions, Type and Application, Forcast to 2021 (2017), damandeep.k.@absolutereports.com.

Fink JK. High Performance Polymers 2nd ed. Elsevier Inc., Amsterdam 2014. https://doi.org/10.1016/B978-0-323-31222-6.00009-1 DOI: https://doi.org/10.1016/B978-0-323-31222-6.00009-1

Elias HG. Neue polymere Werkstoffe. Carl Hanser Verlag/München 1975.

Elias HG. Kunststoffe mit besonderen Eigenschaften, Ullmann 4.Aufl. Bd.15 1979.

Iredale RJ, Ward C, Hamerton I. Modern advances in bismaleimide resin technology: A 21st century perspective on the chemistry of addition polyimides. Progress in Polymer Sci 2017; 69: 1-21. https://doi.org/10.1016/j.progpolymsci.2016.12.002 DOI: https://doi.org/10.1016/j.progpolymsci.2016.12.002

Miracle DB, Donaldson StL. ed. ASM Handbook Composites Bismaleimide Resin 2001; Vol. 21: pp. 97-104. https://doi.org/10.31399/asm.hb.v21.a0003364 DOI: https://doi.org/10.31399/asm.hb.v21.a0003364

US 2,818,405. DuPont Kovacic P. Elastomeric reaction products of bismaleimides with organic diamines 1957.

US 3,380,964. Rhone Poulenc Rhodiaceto, Grundschober F., Sameth J., Reticulated polyimides and method of producing some from N.N’ bisimides 1968.

Brit 1,190,718. Rhone Poulenc Bargain M., Combert A., New cross-linked Resin 1968

US 4,100,140. Ciba Geigy Zalur Abdul-Cader, Renner A. Process for the manufacture of crosslinked polymers, which contain imide groups 1978

WO 97/33933. A1 HOS Technik Horacek H. Sulzer P., Bismaleinimidharze mit einem Gehalt an freiem aromatischem Diamin von weniger als 0,1% 1997.

EP 0330020 A-1. Chemie Linz,Horacek H. Diamines and Bismaleimides as well as Polyimides prepared therefrom 1989.

Metzger JV. Chemistry of Heterocyclic Compounds John Wiley /New York 815 Thiazole and its derivates 1979; 34(1). https://doi.org/10.1002/9780470187067 DOI: https://doi.org/10.1002/9780470187067

Müller Houben- Weyl Methoden der organischen Chemie Band IX (1955) G. Thieme/Stuttgart 93 and Band XI/1 1957; 341.

Varma IK, Sanita S, Varma DS. Addition Polyimides: III. Thermal Behavior of Bismaleimides. J Polym Sci Pol Chem Ed. 1984; 22: 1419-1433. https://doi.org/10.1002/pol.1984.170220622 DOI: https://doi.org/10.1002/pol.1984.170220622

US 4,433,115. NASA, I.K. Varma, G.M.Fohlen, Phosphorus Containing imide resins 1984. https://doi.org/10.1007/978-1-4615-6743-1_8 DOI: https://doi.org/10.1007/978-1-4615-6743-1_8

Varma IK, Fohler GM, Parker JA. Addition polyimides III: Thermal behaviour of bismaleimides, Synthesis of N,N 3,3` maleimidophenylsulfone and its Michael addition product with 44 `aminodiphenylmethane. J Macromolecular Sci Chem Part A 1983; 209-223.

Farr IV, Grass TE, Ji Q, Granth JE. Synthesis and characterization of diaminophenyl indane based polyimides via ester acid solution imidization. High Performance Pol Vol 1997; 9: 345-352. https://doi.org/10.1088/0954-0083/9/3/012 DOI: https://doi.org/10.1088/0954-0083/9/3/012

AT 388914. Chemie Holding AG. Greber G, Gruber H, Sychra M, Preparation of bis[(aroylamino)phenyl] diphenylsulfones as monomers for thermostable polymers 1989.

EP 316775 A-1. Chemie Linz, Horacek H, Greber G, Bismaleimide sowie daraus hergestellte Polyimide 1987.

WO 89/04298. Chemie Linz Holding, Greber G. Gruber H. Sychra M., Sulfur containing aromatic Tetracarboxylic acids and their derivatives 1980.

US 3,127,414. DuPont Cole Halbert, Gruber Wilhelm, Preparation of m –phenylenedimaleimide 1964.

WO 97/47597. HOS Technik Horacek H. Steinbauer G., Process for Preparation of twice unsaturated Bisimides with a high level of colour stability and a low level of polymers 1997.

Haas HC, MacDonald RL. Maleimide polymers: A colour reaction. J Pol Sci Polym Chem 2003; 11(2): 327-334. https://doi.org/10.1002/pol.1973.170110202 DOI: https://doi.org/10.1002/pol.1973.170110202

Beilstein, Addition of aniline to N-Phenylmaleimide via Michael addition. Handbook of Organic Chemistry Vol. XXII p.529; E V 21/10 p.11 Roy. Swan J Chem Soc 1969; 1886-1889.

van Krevelen DW. Properties of Polymers Correlation with Chemical Structure, Elsevier Publ. Corp. Amsterdam 1972.

van Krevelen DW. Properties of Polymers, Elsevier Publ. Corp. Amsterdam. Thermal decomposition 1990; Chapter 21, 463.

Xiong Y, Boey FYC, Rath SK. Kinetic study of the curing behaviour of Bismaleimide Modified with Diallylbisphenol A. J Appl Pol Sci 2003; 90(8): 2229-2240. https://doi.org/10.1002/app.12885 DOI: https://doi.org/10.1002/app.12885

Radue MS, Varshney V, Baur JW, Roy AK, Odegard GM. Molecular Modelling of Cross linked Polymers with Complex Cure Pathways: A Case study of Bismaleimide Resin. Macromolecules 2018; 51(5): 1830-1840. https://doi.org/10.1021/acs.macromol.7b01979 DOI: https://doi.org/10.1021/acs.macromol.7b01979

Vollmert B. Grundriß der makromolekularen Chemie. Springer Verlag 1962; 32. https://doi.org/10.1007/978-3-662-25680-0 DOI: https://doi.org/10.1007/978-3-662-25680-0

Giulio CD, Gautier M, Jasse B. Fourier Transform Infrared Spectroscopic Characterization of Aromatic Bismaleimide Resin in Cure States. J Appl Polym Sci 1964; 29: 1771-1779. https://doi.org/10.1002/app.1984.070290530 DOI: https://doi.org/10.1002/app.1984.070290530

Grenier-Loustalot MF, Gouarderes F, Joubert F, Grenier Ph. Synthesis, mechanism and kinetic of radical polymerization of bismaleimidetype telechelic oligomers in solvent and in solid state. Polymer 1993; 34(18): 3848-3859. https://doi.org/10.1016/0032-3861(93)90510-H DOI: https://doi.org/10.1016/0032-3861(93)90510-H

Barton JM, Hamerton I, Rose JB, Warner D. The synthesis, characterization and polymerization kinetic study of a series of related addition polyimides. High Perform Polym 1994; 6: 21-34. https://doi.org/10.1088/0954-0083/6/1/003 DOI: https://doi.org/10.1088/0954-0083/6/1/003

Grenier-Loustalot MF, da Cunha L. Thermostabile polymers: Spectroscopic and thermal studies of bismaleimides systems in solid state. High Perform Polym 1998; 10: 285-308. https://doi.org/10.1088/0954-0083/10/3/006 DOI: https://doi.org/10.1088/0954-0083/10/3/006

Phelan JC, Sung CSP. Cure Characterization in Bismaleimide Diallylbisphenol A Resin by Fluorescence FT IR and UV Reflection Spectroscopy. Macromolecules 1997; 30(22): 6845-6851. https://doi.org/10.1021/ma961887f DOI: https://doi.org/10.1021/ma961887f

Li J, Stoliarov StI. Measurement of kinetics and thermodynamics of thermal degradation for charring polymers. Polym Degrad Stab 2013; 1-14. https://doi.org/10.1016/j.polymdegradstab.2015.03.003

Li J, Gong J, Stoliarov StI. Development of Pyrolysis Models for charring Polymers. Polym Degrad and Stab 2015; 115: 138-152. DOI: https://doi.org/10.1016/j.polymdegradstab.2015.03.003

Austen AC, Sivarajan S. Encyclopdia of Materials Science and Technology (2004); Reference Moule in Material Science and Material Engineering. Glass Transition 2017.

Ojovan MI, Travis KP, Hand RJ. Condensed Thermodynamic parameters of bonds in glassy materials from viscosity temperature relationship. J Physics 2007. https://doi.org/10.1088/0953-8984/19/41/415107 DOI: https://doi.org/10.1088/0953-8984/19/41/415107

Loncrini DF. Aromatic Polyesterimides. J Pol Sci Part A-1 1988; 1: 1331-1541.

EP 0597301 A-1. Chemie Linz, Horacek H., Polyesterimide aus Trimellitsäure, Propandiphenol und einem aromatischen Diamin mit verbesserten Eigenschaften, ihre Herstellung und Verwendung 1994.

Dolui SK, Pal D, Maiti S. Synthesis of a Novel Polyesterimide. J Appl Pol Sci 1985; 30: 3867-3878. https://doi.org/10.1002/app.1985.070300925 DOI: https://doi.org/10.1002/app.1985.070300925

Downloads

Published

2020-02-25

How to Cite

Horacek, H. (2020). Mono- and Bis- Maleimide Resins in Preimpregnated Fibres . Journal of Research Updates in Polymer Science, 9, 1–23. https://doi.org/10.6000/1929-5995.2020.09.01

Issue

Section

Articles