homepageImage en US

Effect of Extrusion Parameters on Properties of Powder Coatings Determined by Infrared Spectroscopy

A. Lepschi, J. Kilgus, M. Brandstetter and J. Miethlinger

DOI: http://dx.doi.org/10.6000/2369-3355.2017.04.02.1

Published: 05 October 2017

 

Abstract: In polymer extrusion, compounding is a continuous mixing process that is also used to produce highly reactive powder coatings. A premixed batch of powder coating is added to the feeding section and extruded, preferably by a co-rotating twin-screw extruder. One essential parameter in the processing of highly reactive materials is the melt temperature: If it is too high, pre-reactions occur during the extrusion process, which may cause high rejection rates. We studied the melt temperature of an epoxy/carboxyl-based powder coating using a retractable thermocouple at 3 different axial positions along the barrel of a ZSK34 co-rotating twin-screw extruder. The influence of different processing conditions on the reactivity of a highly reactive powder coating was examined by infrared spectroscopy and differential scanning calorimetry. Furthermore, the specific energy input and the color change in the finished powder coating at different processing points were investigated. Multivariate data analysis was used to correlate mid-infrared spectra, melt temperatures, specific energy inputs, enthalpies of reaction and changes in color.

Keywords: Extrusion, twin screw, infrared spectroscopy, ATR, DSC.

Download

Submit to FacebookSubmit to TwitterSubmit to LinkedIn