Modified Poly(ethylene terephthalate) Nano Fibers for Removal of Copper(II) Ions
DOI:
https://doi.org/10.6000/1929-5030.2019.08.01Keywords:
Nanofibers, Adsorption, Isotherm, Kinetics.Abstract
In this research, the adsorption of Cu2+ ions from aqueous solution was investigated by the modified poly (ethylene terephthalate) fibers as a new adsorbent. The best condition of electrospinning was recorded (voltage= 10 kV- distance from nozzle= 12.5 cm - solution convcentration= 0.2 g/mL). The optimum condition for removal of Cu2+ ions were determined (pH=10 - time= 60 min - C= 120 mg/L, qm = 62.4 mg/g). The adsorption data were best fitted by dubinin-radushkevich isotherm and pseudo-second order kinetic models, as well. Structure of the nanofibers were emphasized by scanning electron microscpy (SEM) and thermo gravimetric analysis (TGA).
References
[1] Baumgarten PK. Electro Spinning of Acrylic Macrofibers. J Col Interface Sci 1971; 36: 71-79. https://doi.org/10.1016/0021-9797(71)90241-4
[2] Doshi J, Reneker DHJ. Electrospinning Process and Applications of Electrospun Fibers. J Electrost 1995; 35: 151- 160. https://doi.org/10.1016/0304-3886(95)00041-8
[3] Chieu TC, Dresselhaus MS. A lattice dynamical model for graphite. Phys Rev 1982; B26: 4514-4522. https://doi.org/10.1103/PhysRevB.26.4514
[4] Renker DHJ, Kataphinan W, Theron A, Zussman E, Yarin A. Nanofiber garlands of polycaprolactone by electrospinning. Polymer 2002; 43: 6785-6794. https://doi.org/10.1016/S0032-3861(02)00595-5
[5] Spivak AF, Dzenis YA, Reneker DHJ. A Model of Steady State Jet in the Electrospinning Process. Mec Rese Com 2000; 27: 37-42. https://doi.org/10.1016/S0093-6413(00)00060-4
[6] Fong H, Chun I, Reneker DHJ. Beaded Nanofibers Formed Durin Electrospinning. Polymer 1990; 40: 4585-4592. https://doi.org/10.1016/S0032-3861(99)00068-3
[7] Ding B, Kimura E, Sato, Fabrication of Blend Biodegradable Nanofibrous Nonwoven Mats Via Multi-jet Electrospinning. Polymer 2004; 45: 1895-1902. https://doi.org/10.1016/j.polymer.2004.01.026
[8] Azizinezhad F. Free Radical Grafting of 2-Hydroxy Propyl Methacrylate/Acrylic Acid Mixture onto Poly (Ethylene Terephthalate) Fibers. Eur J Experimental Biol 2014; 4: 560- 567.
[9] Deitzel JM, Kleinmeyer J, Harris D, Tan NCB. The Effect of Processing Variables on the Morphology of Electrospun Nanofibers and Textiles. Polym 2001; 42: 261-272. https://doi.org/10.1016/S0032-3861(00)00250-0
[10] Yu Q, Wan H. Experimental Verification of Scaling Law between Current and Applied Voltage in Electrospinning. Iran Polym J 2006; 15: 265-268.
[11] Ramakrishna S, Fujihara K, Zuwei L. An Introduction to Electrospinning and Nanofibers. World Scientific Publishing 2005; 20-80. https://doi.org/10.1142/9789812567611
Downloads
Published
2019-09-20
How to Cite
Azizinezhad, F. (2019). Modified Poly(ethylene terephthalate) Nano Fibers for Removal of Copper(II) Ions. Journal of Applied Solution Chemistry and Modeling, 8, 1–6. https://doi.org/10.6000/1929-5030.2019.08.01
Issue
Section
General Articles
License
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
