A Simplified Analytical Solution for the Computation of Machine Path in Filament Winding of Cylindrical Angle-Ply and Double-Double Structures
DOI:
https://doi.org/10.6000/1929-5995.2022.11.07Keywords:
Filament winding, machine path, angle-ply, double-double, grid structure, composite tubesAbstract
This paper presents a simplified computation approach for the machine path (or winding trajectory) of grid structures and tubes with a circular cross-section and angle-ply or double-double layup. The solution for the machine path is given through controllable degrees of freedom of a low-cost two-axis filament winding machine (FWM): mandrel rotation and translation of the delivery eye along the axis of the mandrel. The efficiency of the analytical solution for the machine path of the FWM was ascertained by automated laying the cotton thread over the geodesic and non-geodesic groove imprinted on the surface of a cylindrical polylactide mandrel. These results validated the possibility of manufacturing cylindrical composite structures with an angle-ply layup or double-double stacking sequence, without the need for expensive software, making the winding technology accessible to society and promoting university extension.
References
Green JE, Automated Filament Winding Systems. In: Peters ST, editor. Composite Filament Winding. ASM International: Materials Park 2011; pp. 7-18 DOI: https://doi.org/10.31399/asm.tb.cfw.t52860007
Huybrechts S, Hahn S, Meink T. Grid Stiffened Structures: A Survey of Fabrication, Analysis and Design Methods. In: International Conference on Composite Materials. Paris, 1999. Available from: https://www.iccm-central.org/ Proceedings/ICCM12proceedings/site/papers/pap357.pdf
Vasiliev VV, Barynin VA, Rasin AF. Anisogrid lattice structures – survey of development and application. Composite Structures 2001; 54: 361-370. https://doi.org/10.1016/S0263-8223(01)00111-8 DOI: https://doi.org/10.1016/S0263-8223(01)00111-8
Vasiliev VV, Barynin VA, Razin AF. Anisogrid composite lattice structures – Development and aerospace applications. Composite Structures 2012; 94: 1117-1127. https://doi.org/10.1016/j.compstruct.2011.10.023 DOI: https://doi.org/10.1016/j.compstruct.2011.10.023
Abdalla FH, Mutasher SA, Khalid YA, Sapuan SM, Hamouda AMS, Sahari BB, Hamdan MM. Design and Fabrication of Low Cost Filament Winding Machine. Mater Des 2007; 28: 234-239. https://doi.org/10.1016/j.matdes.2005.06.015 DOI: https://doi.org/10.1016/j.matdes.2005.06.015
Mateen MA, Shankar DVR, Hussain MM. Design and Development of Low Cost Two Axis Filament Winding Machine. J Adv Manuf Technol 2018; 12: 117-126. Available from: https://jamt.utem.edu.my/jamt/article/view/1862/3349
Krishnamurthy TN, Idkan M. Fabrication of Low Cost Filament Winding Machine. Int J Recent Trends Electr Electron Eng 2014; 4: 30-39.
Mutasher S, Mir-Nasiri N, Lin LC. Small-Scale Filament Winding Machine for Producing Fiber Composite Products. J Eng Sci Technol 2012; 7: 156-168.
Quanjin M, Rejab MRM, Sahat IM, Amiruddin M, Bachtiar D, Siregar JP, Ibrahim MI. Design of Portable 3-Axis Filament Winding Machine with Inexpensive Control System. J Mech Eng Sci 2018; 12: 3479-3493. https://doi.org/10.15282/jmes.12.1.2018.15.0309 DOI: https://doi.org/10.1088/1757-899X/257/1/012039
Quanjin M, Rejab MRM, Kumar NM, Idris MS. Experimental Assessment of the 3-Axis Filament Winding Machine Performance. Results Eng 2019; 2: 100017. https://doi.org/10.1016/j.rineng.2019.100017 DOI: https://doi.org/10.1016/j.rineng.2019.100017
Hunt CJ, Wisnom MR, Woods BKS. WrapToR Composite Truss Structures: Improved Process and Structural Efficiency. Compos Struct 2019; 230: 111467. https://doi.org/10.1016/j.compstruct.2019.111467 DOI: https://doi.org/10.1016/j.compstruct.2019.111467
Sofi T, Neunkirchen S, Schledjewski R. Path Calculation, Technology and Opportunities in Dry Fiber Winding: A Review Adv Manuf Polym Compos Sci 2018; 4: 57-72. https://doi.org/10.1080/20550340.2018.1500099 DOI: https://doi.org/10.1080/20550340.2018.1500099
Mazumdar SK, Hoa SV. Analytical Models for Low Cost Manufacturing of Composite Components by Filament Winding, Part I: Direct Kinematics. Journal of Composite Materials 1995; 29 (11): 1515-1541. https://doi.org/10.1177/002199839502901106 DOI: https://doi.org/10.1177/002199839502901106
Zu L, Xu H, Zhang B, Li D, Zi B, Zhang B. Design and production of filament-wound composite square tubes. Composite Structures 2018; 191: 202-208. https://doi.org/10.1016/j.compstruct.2018.02.069 DOI: https://doi.org/10.1016/j.compstruct.2018.02.069
Andrianov A, Tomita EK, Veras CAG, Telles BA. Low-Cost Filament Winding Technology for University Laboratories and Startups. Polymers 2022; 14: 1066. https://doi.org/10.3390/polym14051066 DOI: https://doi.org/10.3390/polym14051066
Abdel-Hady F. Filament Winding of Revolution Structures. J Reinf Plast Compos 2005; 24: 855-868. https://doi.org/10.1177/0731684405047772 DOI: https://doi.org/10.1177/0731684405047772
Seereerem S, Wen JTY. An all-Geodesic algorithm for filament winding of a T-shaped form. IEEE Trans Ind Electron 1991; 38: 484-90. https://doi.org/10.1109/41.107105 DOI: https://doi.org/10.1109/41.107105
Koussios S, Bergsma OK, Beukers A. Filament Winding. Part 2: Generic Kinematic Model and Its Solutions. Compos Part A Appl Sci Manuf 2004; 35: 197-212. https://doi.org/10.1016/j.compositesa.2003.10.004 DOI: https://doi.org/10.1016/j.compositesa.2003.10.004
Radzevich SP. Geometry of Surfaces. 2nd ed. Springer Nature: Cham, Switzerland; 2020. DOI: https://doi.org/10.1007/978-3-030-22184-3
Scholliers J. Robotic filament winding of asymmetric composite parts; 1994. Available from: https://lirias.kuleuven.be/retrieve/224495
Reynolds H. Pressure vessel design, fabrication, analysis, and testing. In: Peters ST, editor. Composite Filament Winding. ASM International: Materials Park 2011; pp. 115-148. DOI: https://doi.org/10.31399/asm.tb.cfw.t52860115
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Policy for Journals/Articles with Open Access
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Policy for Journals / Manuscript with Paid Access
Authors who publish with this journal agree to the following terms:
- Publisher retain copyright .
- Authors are permitted and encouraged to post links to their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work .
