Table of Contents

Volume 2 No. 2, 2013

* This issue includes papers published with

Organomodified Silicone Elastomer (OMSE) for Next Generation Personal Care Products - Pages 85-96
Ashish Anant Vaidya, K. Balu, Mohan Vijaykumar Chavan, Nilmoni Ghosh and Amit Kumar
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.1

Preparation and Characterization of Nitrile Butadiene Rubber (NBR)/Polyoxymethlene (POM) Blends Compatibilized by Maleic Anhydride Grafted POM (MAH-g-POM) - Pages 97-104
Jia-Qi Luo, Bin Yang, Guo-Jun Cheng, Ru Xia, Li-Feng Su, Ji-Bin Miao, Jia-Sheng Qian and Peng Chen
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.2

Structural, Morphological and Tensile Study of CdS/Polystyrene (PS) Nanocomposite - Pages 105-109
Vishal Mathur and Kananbala Sharma
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.3

Electrical Study of Al/n-ZnS Schottky Junction on Polymer Substrate - Pages 110-114
Sandhya Gupta, N.S. Saxena and Kananbala Sharma
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.4

Electric Poling and Relaxation Studies of PMMA Thin Films Containing Diaminopyrazole Derivatives as Dipolar Chromophores - Pages 115-121
Sanjiv Arora and Sushil Kumar
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.5

Biodegradability Kraft Paper Coated with Films Emulsified Chitosan and Palmitic Acid - Pages 122-131
Arlete B. Reis, Cristiana M.P. Yoshida, Elke S.D. Vilela, Rosely S. Nascimento, Itamar S. Melo and Telma T. Franco
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.6

Saving Energy in the GFRP Pultrusion Process - Pages 132-141
F.J.G. Silva, M.C.S. Ribeiro, A.C.M. Castro, M.R. Alvim, J.P. Meixedo, A. Fiúza and M.L. Dinis
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.02.7

Table of Contents

Volume 2 No. 1, 2013

* This issue includes papers published with

The Use of an In-Situ Measurement to Probe the Solidification Kinetics of Injection-Molded HDPE/PP Blends - Pages 1-7
Bin Yang, Gui-Jing Li, Ming-Bo Yang, Li-Feng Su, Ji-Bin Miao, Ru Xia, Peng Chen, Shuang-Quan Deng and Jia-Sheng Qian
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.1

Modeling DSC Melting Curves of Isotactic Polypropylene – Source of Information on Isospecificity of Active Centers - Pages 8-23
Yury V. Kissin
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.2

Influence of Carbon Fiber Addition in Physical-Thermal Properties of Composites Obtained by RTM - Pages 24-29
Sérgio Roberto Montoro, Isabelle Catarina de Paula, Thatiane Brocks, Cirlene Fourquet Bandeira, Herman Jacobus Cornelis Voorwald and Maria Odila Hilário Cioffi
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.3

Dual Filler Effect of Compatibilized Pure and Oil Extended Ethylene Propylene Diene Monomer Nanocomposites - Pages 30-38
R. Rajasekar, C.K. Das, G.C. Nayak, S. Ramakrishnan, M. Harikrishnakumar and P. Muthukumar
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.4

Photodegradation of Polystyrene Films Containing UV-Visible Sensitizers - Pages 39-47
Leticia F.A. Pinto, Beatriz E. Goi, Carla C. Schmitt and Miguel G. Neumann
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.5

Optimization of Process Parameters for Generation of Nanocellular Polymer Foams - Pages 48-56
Subhendu Bhattacharya, Rahul Gupta and Sati N. Bhattacharya
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.6

Kinetic Studies on Cure Kinetics of DGEBA (Diglycidyl Ether of Bisphenol-A) with Terephthalamide Hardening System generated from PET waste - Pages 57-67
Krishna Dutt, R.K. Soni, Meenu Teotia, S.P. Sharma and Harjeet Singh
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.7

Intensification of Conductivity and Solubility of Polypyrrole Using Acrylic Acid and Polyacrylic Acid Dopants - Pages 68-78
P. Meenakshi, M. Selvaraj and S. Ramu
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.8

A Case Study on the Eco-Efficiency Performance of a Composite Processing Industry: Evaluation and Quantification of Potential Improvements - Pages 79-84
M.C.S. Ribeiro, A.C.M. Castro, F.J.G. Silva, J.P. Meixedo, L. Oliveira, M.R. Alvim, A. Fiúza and M.L. Dinis
DOI: http://dx.doi.org/10.6000/1929-5995.2013.02.01.9