JCST

After completing his primary and secondary education in Antalya, he completed his undergraduate education at Selcuk University, Physics Teaching Department. Then, he went to England (UK) for his graduate education. He completed his master's degree (MPhil) in Atom, Molecule, and Laser Physics at University College London (UCL) in London under the supervision of Prof. Dr. Peter Barker and Dr. Jonathan Underwood.

He completed his Ph.D. in Physics working on plasmonic Au and Ag nanoparticles at the Dept. of Physics, Dicle University. He is currently working as a research associate at Dicle University, Physics Department. Areas of expertise and research interests; lasers, Atomic and molecular physics, plasmonic nanoparticles, sensors, thin films, and spin coating.

Ender Brief profile:

Chemical Engineer with experience in research and development of thermal barriers coatings (TBCs) and environmental barriers coatings (EBCs) such as zirconia (ZrO2), yttria-stabilized zirconia (YSZ) and silicon carbide (SiC), obtained using Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) technique for the protection of metallic structures (steels and nickel alloys). Characterization of their mechanical properties, thermal and mass behavior of ceramic precursors, microstructure and phase content using advanced techniques such as thermogravimetric analysis, differential thermal analysis, mass spectroscopy, scanning electron microscopy coupled with energy dispersive spectroscopy, focused ions, grazing incidence X-ray diffraction and Raman spectroscopy.

Also have experience in research and development of alkaline cements formulated 100% from urban, industrial and agricultural wastes, such as blast furnace slag, urban waste glass, sugar cane bagasse ash, rice husk ash, pumice, among others. Characterization of its mechanical properties, microstructure and reaction products using advanced techniques such as scanning electron microscopy, X-ray diffraction and infrared spectroscopy.

ORCID ID: https://orcid.org/0000-0001-5621-9624

List of publications:

Esquivel-Medina, S., Espinoza-Pérez, L.J. & López-Honorato, E. Corrosion behavior of ZrO2 and YSZ in molten FLiNaK salt. MRS Advances 7, 19–23 (2022).https://doi.org/10.1557/s43580-022-00224-3
Francisco J. Cano, Orlando Castilleja-Escobedo, J. Espinoza-Pérez, Cecilia Reynosa-Martinez, and Eddie López-Honorato, Effect of deposition conditions on phase content and mechanical properties of yttria-stabilized zirconia thin films deposited by sol-gel/dip-coating, Journal of Nanomaterials, vol. 2021, Article ID 4449890, 9 pages, 2021. https://doi.org/10.1155/2021/4449890
J. Espinoza-Pérez, S. Esquivel-Medina and Eddie López-Honorato, Influence of SiC microstructure on its corrosion behavior in molten FLiNaK salt, Ceramics International, 47 (2021) 15527-15532.
https://doi.org/10.1016/j.ceramint.2021.02.120

J. Espinoza-Pérez, Eddie López-Honorato, Luis A. González and Verónica García-Montalvo, Comparative study of three yttrium organometallic compounds for the stabilization of the cubic phase in YSZ deposited by PE-CVD, Ceramics International, 47 (2021) 4611-4624. https://doi.org/10.1016/j.ceramint.2020.10.028
J. Espinoza-Pérez, Eddie López-Honorato and Luis A. González, Development of ZrO2 and YSZ coatings deposited by PE-CVD below 800 °C for the protection of Ni alloys, Ceramics International, 46 (2020) 15621-15630.
https://doi.org/10.1016/j.ceramint.2020.03.109

I. Escalante-Garcia, L.J. Espinoza-Perez, A. Gorokhovsky and L.Y. Gomez- Zamorano, Coarse blast furnace slag as a cementitious material, comparative study as a partial replacement of Portland cement and as an alkali activated cement, Construction and Building Materials, 23 (2009) 2511-2517.
https://doi.org/10.1016/j.conbuildmat.2009.02.002

Ender

Majid Mirbod

Industrial Management, Ph.D.

1-Researcher
2-Journal Reviewer
3-Lecturer
4-The industrial engineering books author

Research Area:
Change Recognition
Fuzzy Interface System
Artificial Intelligence
Machine Vision
Department of Industrial Management
Tehran North Branch
Islamic Azad University
Tehran, Iran.

Scopus Author ID: 57343270400

Web of Science Researcher ID: ACI-5747-2022
ORCID: 0000-0001-6781-1615

LinkedIn: https://www.linkedin.com/in/majid-mirbod-ph-d-192b4252

Ender

Pasquale Daniele Cavaliere

-web page: https://www.unisalento.it/scheda-utente/-/people/pasquale.cavaliere
-Professor of Metallurgy, Department of Innovation Engineering, University of Salento, Lecce-Italy
-Chair of Metallurgy
-Scopus profile: https://www.scopus.com/authid/detail.uri?authorId=8670281200

-Member of the Editorial Board:

Applied Chemical Engineering EnPress Publisher-ISSN 2578-2010;

Frontiers in Coatings, Dyes & Interface Engineering; Progress in Physics of Metals National Academy of Sciences of Ukraine- ISSN 1608-1021; Ironmaking and Steelmaking Taylor and Francis- ISSN 1743-2812; Metallurgical and Materials Engineering-ISSN 2217-8961; Tribology-Materials, Surfaces and Interfaces Taylor and Francis- ISSN 1751-5831; Powders MDPI- ISSN 2674-0516; Metals MDPI-ISSN 2075-4701.

-Books:

"Hydrogen Assisted Direct Reduction of Iron Oxides" for Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-030-98055-9; "Fatigue and Fracture of Nanostructured Materials" for Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-030-58087-2; "Laser Cladding of metals" for Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-030-53194-2; "Clean Ironmaking and Steelmaking Processes - Efficient Technologies for Greenhouse Emissions Abatement" for Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-030-21208-7; "Spark Plasma Sintering of Materials: Advances in Processing and Applications" for Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-030-05326-0; "Cold Spray Coatings-Recent trends and future perspectives", Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-319-67182-6; "Ironmaking and Steelmaking Processes: Greenhouse emissions control and reduction" per Springer Science-233 Spring St, New York, NY 10013-1578; USA. ISBN 978-3-319-39527-2

Ender

Associate Professor Dr. Sha Shiong, NG received his PhD degree in Condensed Matter Physics from Universiti Sains Malaysia (USM), Malaysia. Currently, he serves as Program Chair at the Institute of Nano Optoelectronics Research and Technology (INOR), USM. His research area focuses on metal-organic chemical vapour deposition of III-nitride semiconductor materials for light emitting, solar cells, and sensors applications. Dr. Ng is also working on the low-cost synthesis of gallium nitride and indium nitride as well as transparent conducting gallium oxide using the sol-gel spin coating technique for optoelectronic applications. In 2018, he was a Visiting Research Scholar for 6 months at Prof. Dr. Shuji Nakamura (2014 Nobel Prize winner in Physics) Laboratory at the Solid State Lighting & Energy Electronics Center (SSLEEC), University of California, Santa Barbara, USA. Dr. Ng has published more than 190 research papers. His current h-index is 20. Besides, he has 4 patents (one granted and 3 filed), and published two monographs. He was the principal investigator for 2 international, 6 national, and 7 university research grants. At present, Dr. Ng is the Senior Member of Optica, and a member of the Materials Research Society, the Society for Applied Spectroscopy, and the SPIE. He is also a member of the National Council of Professors, a life member of the Malaysian Solid State Science & Technology Society and the Malaysian Institute of Physics. He is also a regular reviewer for many reputable journals. Currently, he serves as an Associate Editor of IEEE Photonics Technology Letters.

Researcher ID: G-6189-2010

Scopus Author ID: 57198427721

ORCID: 0000-0003-2023-6419

Google Scholar ID: https://scholar.google.com/citations?user=VimW3VUAAAAJ&hl=en

h-Index: 20

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.